Connects parts into more complex components and ensures all parts fit correctly and are suitable for the final product. The goal is to produce a quality product. Assembly is one of the final stages before our product is shipped to our customers, so attention to detail is required to be successful at this position.

Job Duties:

• Reads and comprehends instructions and follows established procedures.

• Verifies that you have all material and equipment needed to begin the process.

• Takes measurements to ensure perfect fit of components.

• Selects or modifies components according to measurements and specifications.

• Aligns material and put together parts to build more complex units.

• Checks output to ensure highest quality.

• Maintains equipment and workspace in good condition.

• Inputs production quantities and time data.

• Reports on issues, malfunction, or defective parts.

• Other duties as assigned.

Skills and Qualifications:

• High School Diploma or GED

• Ability to work with metric and standard measurement systems (including decimals).

• Technical knowledge and ability to read blueprints and drawings (will train)

• Ability in using tools:

o Power air and/or battery powered tools such drills, impact wrenches, and staplers.

o Drill press and table saw

o Simple tooling set up.

• Good understanding of quality control principles.

• Good communication skills (verbal and written).

• Good hand-eye coordination and dexterity

• Ability to work with wood, metal, and foam.

• Ability to work regular schedules set forth by the Management team.

• Able to lift up to 40 pounds.

Benefits once hired in!

•Health Insurance

•Dental Insurance

•Vision Insurance

•Life Insurance

•PTO - Based on once you work - 1 week can carry over at the end of the year

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Connects parts into more complex components and ensures all parts fit correctly and are suitable for the final product. The goal is to produce a quality product. Assembly is one of the final stages before our product is shipped to our customers, so attention to detail is required to be successful at this position.

Job Duties:

• Reads and comprehends instructions and follows established procedures.

• Verifies that you have all material and equipment needed to begin the process.

• Takes measurements to ensure perfect fit of components.

• Selects or modifies components according to measurements and specifications.

• Aligns material and put together parts to build more complex units.

• Checks output to ensure highest quality.

• Maintains equipment and workspace in good condition.

• Inputs production quantities and time data.

• Reports on issues, malfunction, or defective parts.

• Other duties as assigned.

Skills and Qualifications:

• High School Diploma or GED

• Ability to work with metric and standard measurement systems (including decimals).

• Technical knowledge and ability to read blueprints and drawings (will train)

• Ability in using tools:

o Power air and/or battery powered tools such drills, impact wrenches, and staplers.

o Drill press and table saw

o Simple tooling set up.

• Good understanding of quality control principles.

• Good communication skills (verbal and written).

• Good hand-eye coordination and dexterity

• Ability to work with wood, metal, and foam.

• Ability to work regular schedules set forth by the Management team.

• Able to lift up to 40 pounds.

Benefits once hired in!

•Health Insurance

•Dental Insurance

•Vision Insurance

•Life Insurance

•PTO - Based on once you work - 1 week can carry over at the end of the year

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

We are seeking a Press Brake Operators to become an integral part of our clients team. Press Brake Operators perform tasks that are essential to our production processes.

Job Duties:

•Ability to produce quality parts that meet company/customer specifications.

•Record daily production and scrap in ERP system.

•Ability to read and comprehend detailed work instructions, blueprints, and/or drawings.

•Ability to follow daily schedules and meet production goals.

•Follow industry and company policies, procedures and safety standards at all times.

•Effectively communicates any issues affecting production to the team lead or supervisor

•Perform physical activities that require considerable use of arms and legs. Activities include lifting, stooping, twisting and bending on a regular basis.

•Set up, adjust, and operate a press brake to perform a wide variety of operations.

•Properly change tooling, ram position, ram speed and backstop position as needed.

•Maintain a clean and organized work area.

•Receive work order through Plex

•Review, obtain and set-up tooling

•Press first piece and adjust press brake as needed

•Perform other duties as assigned

Skills and Qualifications:

•5+ year press brake experience.

•Ability to properly set up and operate Brake Press

•Working knowledge of calipers, micrometers, and tape measures, etc.

•Proficiency with hand tools.

•Be able to lift up-to 35 lbs on a regular basis. Occasionally lift up-to 40 lbs.

•Be able to sit or stand for long periods of time

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The primary responsibilities of this position would be operating a CNC mill and lathe machines.

Job Duties :

•Adjust machine controls and change tool settings to keep dimensions within specified tolerances.

•Replace worn tools, and sharpen dull cutting tools and dies, using bench grinders or cutter-grinding machines.

•Inspect sample work pieces to verify conformance with specifications, using instruments such as gauges, micrometers, and dial indicators.

•Start mill or turning machines and observe operations to ensure that specifications are met.

•Position, secure, and align cutting tools in tool holders on machines, using hand tools, and verify their positions with measuring instruments.

•Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances.

•Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences.

•Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics.

•Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to work pieces.

•Refill, change, and monitor the level of fluids, such as oil and coolant, in machines.

•Install holding fixtures, cams, gears, and stops to control stock and tool movement, using hand tools, power tools, and measuring instruments.

•Compute unspecified dimensions and machine settings, using knowledge of metal properties and shop mathematics.

•Lift metal stock or work pieces manually or using hoists, and position and secure them in machines, using fasteners and hand tools.

•Move tool holders manually or by turning hand wheels, or engage automatic feeding mechanisms to feed tools to and along work pieces.

•Turn valve handles to direct the flow of coolant onto work areas or to coat disks with spinning compounds.

Skills and Qualifications

•CNC Machine Operator Experience

•CNC Set up is a plus but not required

•The ability to stand for 8+ hours a day

Benefits once hired in!

•Benefits become effective the first of the month following date of hire:

•Health Insurance

•Medical - Priority Health

•Dental - MetLife

•Vision - MetLife

•Life/AD&D - Equitable - 100% Company Paid

•Short Term Disability - Equitable - 100% Company Paid

•Voluntary Life AD&D - Equitable - 100% Employee Paid

•Voluntary Long Term Disability - Equitable - 100% Employee Paid

•AFLAC - 100% Employee Paid

•401(k)

•Vacation - Eligible for 40 hours of vacation and 40 hours of PTO (sick time) upon hire (assuming completed 90 days as temp). These hours are pro-rated on an annual calendar beginning January 1.

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The CNC Machinist is responsible for the full lifecycle of part production on CNC mills and lathes, from initial machine configuration to final quality inspection. This is a technical role that requires setting up tooling, loading raw materials, and making real-time adjustments to G-code programs to maintain tight tolerances. Successful performance requires the physical ability to handle heavy parts and acute attention to detail for troubleshooting mechanical issues in a fast-paced environment.

Job Duties:

• Machine Operation: Efficiently operate CNC mills and lathes to meet production targets. This requires managing multiple machines simultaneously while ensuring all parts meet strict quality specifications and project timelines.

•Technical Setup: Independently perform accurate machine and tool setups according to technical documentation to ensure optimal production flow.

•Quality Assurance: Execute 1st-piece, in-process, and last-piece inspections. Proficiency with precision instruments—including micrometers, calipers, comparators, gauges, and CMM equipment—is required to verify part integrity.

•Data Management: Utilize JobBoss and other digital applications for accurate data collection, production tracking, and internal communication.

•Preventative Maintenance: Perform routine operator-level maintenance to ensure equipment longevity and peak performance.

•Troubleshooting: Rapidly diagnose and resolve equipment malfunctions or tooling issues to minimize downtime and maintain precision.

•Secondary Operations: Conduct de-burring and rework of in-process components to meet final finishing standards.

•Process Improvement: Proactively identify and recommend adjustments to optimize machining processes and increase operational efficiency.

•Workplace Organization: Maintain a clean, organized, and efficient workstation in full alignment with 5S standards.

•Safety & Compliance: Execute all duties in strict accordance with PAC safety standards and company policies to ensure a zero-accident environment.

Skills and Qualifications:

• 3-5 years experience as a CNC Machine Operator and set up (Mill and Lathe Machines)

• A comprehensive understanding of machining center theory, including proficiency in X, Y, and Z-axis orientation, as well as edge and centerline pickup procedures.

• Advanced ability to utilize a wide range of precision measuring instruments, including micrometers, calipers, various gauges (pin, thread, indicator, height), optical comparators, and CMM equipment.

• Expert-level blueprint reading skills with full command of GD&T (Geometric Dimensioning and Tolerancing) standards.

• Strong interpersonal and communication skills, with a focus on supporting continuous improvement initiatives and meeting rigorous customer specifications.

• Ability to perform complex industrial mathematical functions and navigate basic Windows-based applications and MS Office for production tracking.

•Must meet eligibility requirements to handle sensitive controlled data and materials in strict accordance with ITAR (International Traffic in Arms Regulations) policies.

•Ability to consistently lift, push, and pull raw materials and tooling weighing up to 50 pounds.

•Must maintain vision standards compliant with AS 9100 requirements, including the ability to perform high-precision inspections and detect minute surface defects.

Benefits once hired in!

• Health Insurance

• Vision Insurance

• Dental Insurance

• 401K

• PTO

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The CNC Machinist is responsible for the full lifecycle of part production on CNC mills and lathes, from initial machine configuration to final quality inspection. This is a technical role that requires setting up tooling, loading raw materials, and making real-time adjustments to G-code programs to maintain tight tolerances. Successful performance requires the physical ability to handle heavy parts and acute attention to detail for troubleshooting mechanical issues in a fast-paced environment.

Job Duties:

• Machine Operation: Efficiently operate CNC mills and lathes to meet production targets. This requires managing multiple machines simultaneously while ensuring all parts meet strict quality specifications and project timelines.

•Technical Setup: Independently perform accurate machine and tool setups according to technical documentation to ensure optimal production flow.

•Quality Assurance: Execute 1st-piece, in-process, and last-piece inspections. Proficiency with precision instruments—including micrometers, calipers, comparators, gauges, and CMM equipment—is required to verify part integrity.

•Data Management: Utilize JobBoss and other digital applications for accurate data collection, production tracking, and internal communication.

•Preventative Maintenance: Perform routine operator-level maintenance to ensure equipment longevity and peak performance.

•Troubleshooting: Rapidly diagnose and resolve equipment malfunctions or tooling issues to minimize downtime and maintain precision.

•Secondary Operations: Conduct de-burring and rework of in-process components to meet final finishing standards.

•Process Improvement: Proactively identify and recommend adjustments to optimize machining processes and increase operational efficiency.

•Workplace Organization: Maintain a clean, organized, and efficient workstation in full alignment with 5S standards.

•Safety & Compliance: Execute all duties in strict accordance with PAC safety standards and company policies to ensure a zero-accident environment.

Skills and Qualifications:

• 3-5 years experience as a CNC Machine Operator and set up (Mill and Lathe Machines)

• A comprehensive understanding of machining center theory, including proficiency in X, Y, and Z-axis orientation, as well as edge and centerline pickup procedures.

• Advanced ability to utilize a wide range of precision measuring instruments, including micrometers, calipers, various gauges (pin, thread, indicator, height), optical comparators, and CMM equipment.

• Expert-level blueprint reading skills with full command of GD&T (Geometric Dimensioning and Tolerancing) standards.

• Strong interpersonal and communication skills, with a focus on supporting continuous improvement initiatives and meeting rigorous customer specifications.

• Ability to perform complex industrial mathematical functions and navigate basic Windows-based applications and MS Office for production tracking.

•Must meet eligibility requirements to handle sensitive controlled data and materials in strict accordance with ITAR (International Traffic in Arms Regulations) policies.

•Ability to consistently lift, push, and pull raw materials and tooling weighing up to 50 pounds.

•Must maintain vision standards compliant with AS 9100 requirements, including the ability to perform high-precision inspections and detect minute surface defects.

Benefits once hired in!

• Health Insurance

• Vision Insurance

• Dental Insurance

• 401K

• PTO

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The CNC Machinist is responsible for the full lifecycle of part production on CNC mills and lathes, from initial machine configuration to final quality inspection. This is a technical role that requires setting up tooling, loading raw materials, and making real-time adjustments to G-code programs to maintain tight tolerances. Successful performance requires the physical ability to handle heavy parts and acute attention to detail for troubleshooting mechanical issues in a fast-paced environment.

Job Duties:

• Machine Operation: Efficiently operate CNC mills and lathes to meet production targets. This requires managing multiple machines simultaneously while ensuring all parts meet strict quality specifications and project timelines.

•Technical Setup: Independently perform accurate machine and tool setups according to technical documentation to ensure optimal production flow.

•Quality Assurance: Execute 1st-piece, in-process, and last-piece inspections. Proficiency with precision instruments—including micrometers, calipers, comparators, gauges, and CMM equipment—is required to verify part integrity.

•Data Management: Utilize JobBoss and other digital applications for accurate data collection, production tracking, and internal communication.

•Preventative Maintenance: Perform routine operator-level maintenance to ensure equipment longevity and peak performance.

•Troubleshooting: Rapidly diagnose and resolve equipment malfunctions or tooling issues to minimize downtime and maintain precision.

•Secondary Operations: Conduct de-burring and rework of in-process components to meet final finishing standards.

•Process Improvement: Proactively identify and recommend adjustments to optimize machining processes and increase operational efficiency.

•Workplace Organization: Maintain a clean, organized, and efficient workstation in full alignment with 5S standards.

•Safety & Compliance: Execute all duties in strict accordance with PAC safety standards and company policies to ensure a zero-accident environment.

Skills and Qualifications:

• 3-5 years experience as a CNC Machine Operator and set up (Mill and Lathe Machines)

• A comprehensive understanding of machining center theory, including proficiency in X, Y, and Z-axis orientation, as well as edge and centerline pickup procedures.

• Advanced ability to utilize a wide range of precision measuring instruments, including micrometers, calipers, various gauges (pin, thread, indicator, height), optical comparators, and CMM equipment.

• Expert-level blueprint reading skills with full command of GD&T (Geometric Dimensioning and Tolerancing) standards.

• Strong interpersonal and communication skills, with a focus on supporting continuous improvement initiatives and meeting rigorous customer specifications.

• Ability to perform complex industrial mathematical functions and navigate basic Windows-based applications and MS Office for production tracking.

•Must meet eligibility requirements to handle sensitive controlled data and materials in strict accordance with ITAR (International Traffic in Arms Regulations) policies.

•Ability to consistently lift, push, and pull raw materials and tooling weighing up to 50 pounds.

•Must maintain vision standards compliant with AS 9100 requirements, including the ability to perform high-precision inspections and detect minute surface defects.

Benefits once hired in!

• Health Insurance

• Vision Insurance

• Dental Insurance

• 401K

• PTO

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The CNC Machinist is responsible for the full lifecycle of part production on CNC mills and lathes, from initial machine configuration to final quality inspection. This is a technical role that requires setting up tooling, loading raw materials, and making real-time adjustments to G-code programs to maintain tight tolerances. Successful performance requires the physical ability to handle heavy parts and acute attention to detail for troubleshooting mechanical issues in a fast-paced environment.

Job Duties:

• Machine Operation: Efficiently operate CNC mills and lathes to meet production targets. This requires managing multiple machines simultaneously while ensuring all parts meet strict quality specifications and project timelines.

•Technical Setup: Independently perform accurate machine and tool setups according to technical documentation to ensure optimal production flow.

•Quality Assurance: Execute 1st-piece, in-process, and last-piece inspections. Proficiency with precision instruments—including micrometers, calipers, comparators, gauges, and CMM equipment—is required to verify part integrity.

•Data Management: Utilize JobBoss and other digital applications for accurate data collection, production tracking, and internal communication.

•Preventative Maintenance: Perform routine operator-level maintenance to ensure equipment longevity and peak performance.

•Troubleshooting: Rapidly diagnose and resolve equipment malfunctions or tooling issues to minimize downtime and maintain precision.

•Secondary Operations: Conduct de-burring and rework of in-process components to meet final finishing standards.

•Process Improvement: Proactively identify and recommend adjustments to optimize machining processes and increase operational efficiency.

•Workplace Organization: Maintain a clean, organized, and efficient workstation in full alignment with 5S standards.

•Safety & Compliance: Execute all duties in strict accordance with PAC safety standards and company policies to ensure a zero-accident environment.

Skills and Qualifications:

• 3-5 years experience as a CNC Machine Operator and set up (Mill and Lathe Machines)

• A comprehensive understanding of machining center theory, including proficiency in X, Y, and Z-axis orientation, as well as edge and centerline pickup procedures.

• Advanced ability to utilize a wide range of precision measuring instruments, including micrometers, calipers, various gauges (pin, thread, indicator, height), optical comparators, and CMM equipment.

• Expert-level blueprint reading skills with full command of GD&T (Geometric Dimensioning and Tolerancing) standards.

• Strong interpersonal and communication skills, with a focus on supporting continuous improvement initiatives and meeting rigorous customer specifications.

• Ability to perform complex industrial mathematical functions and navigate basic Windows-based applications and MS Office for production tracking.

•Must meet eligibility requirements to handle sensitive controlled data and materials in strict accordance with ITAR (International Traffic in Arms Regulations) policies.

•Ability to consistently lift, push, and pull raw materials and tooling weighing up to 50 pounds.

•Must maintain vision standards compliant with AS 9100 requirements, including the ability to perform high-precision inspections and detect minute surface defects.

Benefits once hired in!

• Health Insurance

• Vision Insurance

• Dental Insurance

• 401K

• PTO

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Answer incoming calls, emails, or chats to assist customers with inquiries, orders, or issues.

Job Duties:

• Process quotes, orders, information requests from website, emails and phone.

• Manage order throughout order process.

• Provide customers with product details, ship schedule, tracking information.

• Assist customer after shipment with technical information, returns, damage.

• Keep a positive and empathetic attitude with each customer interaction.

• Ensure turnaround times to customers are met.

• Provide detailed and accurate outputs.

• Consistent education on mechanical aptitude in order to master technical aspects of product.

Skills and qualifications:

• Experience in customer service, customer-facing, or sales in a commercial office environment.

• Excellent written and verbal communication skills.

• Excellent computer skills.

• Mechanical and math aptitude.

• Active listener.

• Ability to understand and relate to customer's expectations and main points.

• Ability to multitask in a fast-paced environment.

• Ability to work within a team environment.

Benefits once hired in!

• Medical Insurance

• Dental Insurance

• Life Insurance

• 6 month and then annual performance and wage reviews

• Christmas Party and gift

•LMCU Ballpark annual employee outing, annual cookouts, and luncheons

• 401K

• PTO

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history. *

The Die Setter will perform tasks to Install tooling for casting process as well as identifying and correcting problems.

Job Duties:

•Removes and installs Molds, Trim dies, Staging Fixtures, EOAT, Unloader, Quench from the VRC/PRC casting machines including complete set-up of molds, cooling circuits, fill tubes, etc. and mold preparation.

•Observes and practices all lockout/tagout requirements for casters.

•Operate fork truck and overhead crane to move Tooling.

•Observes machines and equipment for malfunction and adjustments or repairs as directed to ensure the equipment will operate at maximum efficiency, within operating parameters, safely and correctly.

•Tracks and documents productivity information accurately as directed.

•Recommends measures to improve production methods, equipment performance and quality of product.

•Utilize checklist and prepare required documents

•Perform 5 whys when analyzing mistakes or ideas.

•Identify molds that need to be repaired.

•Utilize measurement instruments to perform job.

•Perform -Tear downs of molds

•Sand blast Lower and Cover mold cavities

•Power Wash Support Tooling, EOAT-Unloaders.

•Cleaned and Paint Tool Shop

•Submit one Lean Suggestion Per Month

•Other duties as assigned.

Skills and Qualifications:

•Must be able to read and understand work instructions.

•Must be able to write and complete required paperwork.

•Must possess mechanical aptitude.

•Must pass and receive a mobile equipment and overhead crane license.

•Ability to use torches.

•Able to read and follow verbal and written directions.

•Ability to lift up to 50 lbs.

•Comfortable with standing, bending, twisting, walking, lifting, and reaching throughout your shift.

•The ability to stand for 8+ hours a day

•The job works in conditions with constant exposure to noise, odors, dust, drafts and chemicals.

•May include seasonally hot and humid conditions for extended periods of time.

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The Die Setter will perform tasks to Install tooling for casting process as well as identifying and correcting problems.

Job Duties:

•Removes and installs Molds, Trim dies, Staging Fixtures, EOAT, Unloader, Quench from the VRC/PRC casting machines including complete set-up of molds, cooling circuits, fill tubes, etc. and mold preparation.

•Observes and practices all lockout/tagout requirements for casters.

•Operate fork truck and overhead crane to move Tooling.

•Observes machines and equipment for malfunction and adjustments or repairs as directed to ensure the equipment will operate at maximum efficiency, within operating parameters, safely and correctly.

•Tracks and documents productivity information accurately as directed.

•Recommends measures to improve production methods, equipment performance and quality of product.

•Utilize checklist and prepare required documents

•Perform 5 whys when analyzing mistakes or ideas.

•Identify molds that need to be repaired.

•Utilize measurement instruments to perform job.

•Perform -Tear downs of molds

•Sand blast Lower and Cover mold cavities

•Power Wash Support Tooling, EOAT-Unloaders.

•Cleaned and Paint Tool Shop

•Submit one Lean Suggestion Per Month

•Other duties as assigned.

Skills and Qualifications:

•Must be able to read and understand work instructions.

•Must be able to write and complete required paperwork.

•Must possess mechanical aptitude.

•Must pass and receive a mobile equipment and overhead crane license.

•Ability to use torches.

•Able to read and follow verbal and written directions.

•Ability to lift up to 50 lbs.

•Comfortable with standing, bending, twisting, walking, lifting, and reaching throughout your shift.

•The ability to stand for 8+ hours a day

•The job works in conditions with constant exposure to noise, odors, dust, drafts and chemicals.

•May include seasonally hot and humid conditions for extended periods of time.

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The Dispatcher is responsible for coordinating daily transportation operations, communicating with drivers and customers, and ensuring accurate shipment tracking and updates. This role requires strong organizational skills, attention to detail, and the ability to multitask in a fast-paced environment while providing excellent customer service.

Job Duties:

•Coordinated daily dispatch operations by scheduling and communicating with drivers to ensure on-time pickups and deliveries while providing real-time shipment updates.

•Utilized CieTrade to enter, update, and track load information, customer orders, and transportation details accurately.

•Delivered excellent customer service by responding to client inquiries, resolving issues quickly, and maintaining strong communication between customers, drivers, and internal teams.

Skills and Qualifications:

• Previous experience in customer service(required), scheduling, logistics or dispatch preferred

• Strong communication and interpersonal skills

• Excellent organizational and time management abilities

• Ability to multitask and prioritize in a fast-paced environment

• Problem-solving mindset with a focus on customer satisfaction

• Basic computer skills and experience with scheduling or order management systems

• Ability to work independently and as part of a team

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history. *

FPI load will load/unload parts.

Job Duties:

• Loading and unloading parts off from the line.

• Inspecting parts for visual defects.

• Loading parts into telesis and verifying parts marked correctly.

• Visually inspect casting per customer requirements while maintaining production flow.

• Record scrap and/or production information into Plex.

• Recommend improvements for completing task and/or finishing improvement.

Skills and Qualifications:

• Experience in a manufacturing setting.

• Comfortable in a high heat environment.

• Must be able to read and understand work instructions.

• Must be able to write and complete required paperwork and enter information into Plex system.

• Must have basic math skills - add, subtract, multiply, and divide.

• The ability to stand for 8+ hours a day

• Ability to lift up to 50 lbs

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

A Custom Fabricator specializes in creating one-of-a-kind parts, products, or structures based on client specifications, blueprints, or unique designs. This role requires creativity, precision, and advanced fabrication skills to bring custom concepts to life while meeting quality, safety, and deadline expectations.

Job Duties :

•Operate metalworking machines such as shears, brakes, punches, and drill presses, and CNC equipment to cut, bend, punch, drill, shape, or straighten sheet metal.

•Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, partition frames, dust collection piping, and material handling systems.

•Inspect product quality and 100% conformation to specifications.

•Inspect finished products to verify measurements, tolerances, and compliance.

Skills and Qualifications

•Must have custom weld fabrication experience with sheet metal and structural welding.

•MIG welding various mild steel including 16 gauge, ¼”, 3/8”, ½”.

•TIG/Stick welding experience a plus.

•Ability to read and comprehend engineering drawings, sketches, and work specifications.

•Mechanically inclined with ability to troubleshoot.

•Strong math skills.

•Must have own tools and welding equipment.

•The ability to stand for 8+ hours a day

Benefits once hired in!

•Benefits become effective the first of the month following date of hire:

•Health Insurance - Medical - Priority Health

•Dental Insurance

•Vision Insurance

•Life Insurance

•Short Term and Long Term Disability

•401(k)

•Vacation

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Keeps production floor clean and orderly condition by performing the following duties below.

Job Duties:

•Monitor and maintain cleanliness inside the plant.

•Operate a forklift in areas around the plant.

•Operate a sweeper machine.

•Collect and dispose of trash and recycling materials in designated containers.

•Performs preventative maintenance activities on floor scrubber and maintains cleaning solution tank.

•May clean poles, walls, and machinery.

•Report any maintenance issues related to floors, carpets, or other surfaces.

•Able to add, multiply, divide to calculate cleaning solution/water ratios.

Skills and Qualifications:

•Forklift experience preferred

•Self-motivated and able to complete tasks assigned in a timely manner.

•Ability to handle and dispose of hazardous materials safely.

•Able to read and follow verbal and written directions.

•Ability to lift up to 30 lbs.

•Comfortable with standing, bending, twisting, walking, lifting, and reaching throughout your shift.

•The ability to stand for 8+ hours a day

•The job works in conditions with constant exposure to noise, odors, dust, drafts and chemicals.

•May include seasonally hot and humid conditions for extended periods of time.

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Finishing will process parts per customer requirements.

Job Duties:

• Process castings through automated finish cell per job specific work instructions.

• Load saw fixture for gating and riser removal.

• Visually inspect casting per customer requirements while maintaining production flow.

• Perform audits and gage parts when required.

• Record scrap and/or production information into Plex.

• Recommend improvements for completing tasks and/or finishing improvement.

• Maintain work area keeping it clean from sand.

• Other duties as assigned.

Skills and Qualifications:

• Experience in a manufacturing setting.

• Comfortable in a high heat environment.

• Must be able to read and understand work instructions.

• Must be able to write and complete required paperwork and enter information into Plex system.

• Must have basic math skills - add, subtract, multiply, and divide.

• The ability to stand for 8+ hours a day

• Ability to lift up to 30 lbs

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Finishing will process parts per customer requirements.

Job Duties:

• Process castings through automated finish cell per job specific work instructions.

• Load saw fixture for gating and riser removal.

• Visually inspect casting per customer requirements while maintaining production flow.

• Perform audits and gage parts when required.

• Record scrap and/or production information into Plex.

• Recommend improvements for completing tasks and/or finishing improvement.

• Maintain work area keeping it clean from sand.

• Other duties as assigned.

Skills and Qualifications:

• Experience in a manufacturing setting.

• Comfortable in a high heat environment.

• Must be able to read and understand work instructions.

• Must be able to write and complete required paperwork and enter information into Plex system.

• Must have basic math skills - add, subtract, multiply, and divide.

• The ability to stand for 8+ hours a day

• Ability to lift up to 30 lbs

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Finishes parts by observing if the part meets cosmetic standards (surface appearance or determining any defects), removing remaining 'risers', grinding down 'gate' surfaces, and comparing to visual criteria sheet image and according to work instructions.

Job Duties:

• Visually inspects castings/parts -- looking for defects such as: blow holes, sand holes, shrink, imperfect gates, crush, etc. -- noting variances in part from visual criteria sheet/customer specifications.

• Operates various grinders to remove excess metal from parts.

• Operates various automated cells to process castings.

• Performs minor maintenance on the grinders (replacing wheels & bits)

• Keeps work area clean by performing general housekeeping duties.

Skills and Qualifications:

•Casting and Foundry experience a plus, but not required.

•Ability to stand 8+ hours for their shift

•Must be able to lift 25 pounds at a time.

Benefits once hired in!

• Medical, Dental, & Vision

• Life Insurance

• Short Term Disability

• 401-k with employer match

• Paid time off

• Paid holidays

• Potential monthly bonus of 2%-10%

• Free uniforms

• Prescription safety lens program.

• Air filtration system that brings in fresh air. Walkways are regularly swept to keep them clean.

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Operate powered industrial trucks to load and unload materials and deliveries and move them to and from storage areas, machines and loading docks, into railroad cars or trucks or storage facilities.

Job Duties:

• Operate forklifts (stand-up, sit-down, reach truck, or pallet jack) to load, unload, and move materials safely and efficiently.

• Sort cargo before loading and unloading

• Attach identifying tags to containers or mark them.

• Move freight, stock, or materials to and from storage or production areas

• Assist in staging and organizing products for shipment or production runs

Skills and Qualifications:

• 6 months of forklift experience

• Comfortable working in a freezer setting.

• High school diploma/GED (Preferred but not required)

• National Background Check

Benefits once hired in!

• Eligible for End of Year Bonus

• Overtime Pay for hours worked more than 40 per week

• Benefits include Medical, Dental, Insurance, 401k, etc.

• Paid Cell Phone - Supervisors

• Steady work, our business is strong and growing

• Good Team Environment

• Solid Company, established in the logistics industry

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Operate powered industrial trucks to load and unload materials and deliveries and move them to and from storage areas, machines and loading docks, into railroad cars or trucks or storage facilities.

Job Duties:

• Operate forklifts (stand-up, sit-down, reach truck, or pallet jack) to load, unload, and move materials safely and efficiently.

• Sort cargo before loading and unloading

• Attach identifying tags to containers or mark them.

• Move freight, stock, or materials to and from storage or production areas

• Assist in staging and organizing products for shipment or production runs

Skills and Qualifications:

• 6 months of forklift experience

• Comfortable working in a freezer setting.

• High school diploma/GED (Preferred but not required)

• National Background Check

Benefits once hired in!

• Eligible for End of Year Bonus

• Overtime Pay for hours worked more than 40 per week

• Benefits include Medical, Dental, Insurance, 401k, etc.

• Paid Cell Phone - Supervisors

• Steady work, our business is strong and growing

• Good Team Environment

• Solid Company, established in the logistics industry

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Using a sophisticated system of machines to simultaneously grade, sort and trim the green lumber that are brought in. Loading and unloading lumbar onto or off from the machines or pallets.

Job Duties:

• Taking the lumbar off from the machine and transferring them onto another one to get ready for shipment.

• Taking out the sticks that separates the wood stock during the wood kiln process.

• Unloading the Woodstock's from the machine and reorganizing them according to length.

Skills and Qualifications:

• Able to walk, lift, stand, and bend for 8+Hours.

• Able to frequently lift of move up to 50lbs

Benefits once hired in!

• Medical and Dental Insurance

• PTO

• Paid Holidays

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Helping out the different departments as needed doing a variety of different duties. (finishing, Brake Press, Laser, or Welding)

Job Duties:

• Safely maneuvering forklifts to load, unload, and transport materials within the facility.

• Operating a drill press machine.

• Assembly / Packaging

• PEM Insertion and Machine Operating

• Ensuring quality throughout the process

• Stud Welding

• CNC Loading and Unloading

Skills and Qualifications:

• General machine operating experience

• Blueprint Reading

Benefits once hired in!

• 401k plan available -Enrollment is available after 1 year of service. Must be 21. Company match's .25 on the dollar up to 6% of the wage.

•Affordable health insurance, single $35/wk, family $55/wk. (approximate)

• Yearly cash bonuses

• One week of PTO (prorated at the date of hire)

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

We are seeking a General Laborer to become an integral part of our clients team.

Job Duties:

•Operate a variety of general manufacturing machines and equipment.

•Learn and follow standard operating procedures for each machine.

•Load and unload materials from machines and production areas.

•Inspect parts for quality, accuracy, and defects throughout the production process.

•Use basic measuring tools to verify part dimensions and quality.

•Perform general production tasks such as sorting, deburring, assembling, and packaging parts.

•Maintain a clean, organized, and safe work area.

•Follow all company safety procedures and PPE requirements.

•Work efficiently to meet production goals and quality standards.

•Learn additional manufacturing equipment and processes as training progresses.

•Transition into operating laser cutting machines and brake presses after gaining experience and demonstrating proficiency with general production equipment.

•Read and follow work instructions, production drawings, and job specifications.

•Communicate any machine, material, or quality issues to a supervisor or team lead.

•Assist with other manufacturing duties as needed.

Skills and Qualifications:

•Manufacturing experience preferred

•Working knowledge of calipers, micrometers, and tape measures, etc.

•Proficiency with hand tools.

•Be able to lift up-to 35 lbs on a regular basis. Occasionally lift up-to 40 lbs.

•Be able to sit or stand for long periods of time

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

A grinder is to perform precision smoothing, polishing, or grinding of stainless-steel objects. Using belt grinders, hand grinders and radial grinders to remove metal burrs and non-confirming edges on aluminum parts.

Job Duties:

• Set up and operate standard manufacturing equipment

• Deburr, buff or polish materials to specifications.

• May be required to use hand tools as needed

• Quality Checks

• General upkeep of working area including and up to sweeping, organizing and cleaning.

Skills and Requirements:

• Experience in a foundry setting

• Steel Toe Boots

Benefits once hired in!

• Uniforms - 90-days after hire date Company pays 100%

• Health Insurance (Priority Health) - 90-days after hire date Weekly premium withheld from employee’s paycheck

• Dental Insurance (Mutual of Omaha) - 90-days after hire date Weekly premium withheld from employee’s paycheck

• 401k - Eligible to participate after employed 6-months Company matching contribution is 100% of employee contribution up to 3% of gross wages, then 50% of the employee’s contribution over 3% but not exceeding 5% of gross wages.

• Flexible Spending Account - 90-days after hire date Weekly election amount withheld from employee’s paycheck

• Employee Life, Dependent Life, Accidental Death & Dismemberment - Company pays 100% of the premium $10,000 employee - $5,000 spouse - $1,000 dependent child

• Short Term Disability - Company pays 100% of the premium

• AFLAC - Employee pays 100% of the premiums

• Paid Vacation

• Paid Holidays

• Paid Medical Leave (PMLA)

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The Janitorial Worker is responsible for maintaining a clean, safe, and orderly environment throughout the manufacturing facility, including bathrooms, breakrooms, warehouse areas, offices, and common areas.

Job Duties:

•Clean and sanitize bathrooms, including toilets, sinks, floors, mirrors, and other surfaces.

•Clean and maintain employee breakrooms, including tables, counters, sinks, appliances, and floors.

•Sweep, mop, and vacuum floors throughout the facility.

•Clean and maintain warehouse and common areas.

•Empty trash and recycling containers and replace liners.

•Dust and wipe down desks, tables, counters, doors, and other surfaces as needed.

•Restock bathroom and breakroom supplies such as toilet paper, paper towels, soap, and other items.

•Clean spills and address areas requiring immediate attention to help maintain a safe workplace.

•Follow proper procedures when using cleaning chemicals and equipment.

•Maintain cleaning supplies and notify management when supplies need to be replenished.

•Perform routine cleaning of offices, hallways, entryways, and other assigned areas.

•Assist with general facility cleaning and housekeeping tasks as needed.

•Follow all company safety policies and procedures.

•Perform other related duties as assigned.

Skills and Qualifications:

• Previous experience in janitorial work.

• Excellent organizational and time management abilities.

• Ability to multitask and prioritize in a fast-paced environment.

• Ability to work independently and as part of a team.

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history. *

We are seeking Laser Operators to become an integral part of our clients team. Laser Operators perform tasks that are essential to our production processes.

Job Duties:

•Set up and operate CNC laser cutting equipment to produce metal parts according to work orders and specifications.

•Load and unload raw sheet metal and materials into the laser machine.

•Read and follow blueprints, work instructions, and production drawings.

•Monitor the laser during operation and make basic adjustments as needed.

•Inspect finished parts using measuring tools such as calipers and tape measures to ensure quality and accuracy.

•Identify and report material, machine, or quality issues to the supervisor or team lead.

•Sort, label, and organize completed parts for the next stage of production.

•Complete production paperwork and record quantities and scrap as required.

Skills and Qualifications:

•Laser operating experience.

•Ability to properly set up and operate laser machines.

•Working knowledge of calipers, micrometers, and tape measures, etc.

•Proficiency with hand tools.

•Be able to lift up-to 35 lbs on a regular basis. Occasionally lift up-to 40 lbs.

•Be able to sit or stand for long periods of time

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

The Lead Fabricator is responsible for overseeing fabrication projects from start to finish while guiding and mentoring a team of fabricators. This role requires hands-on fabrication and installation skills, strong leadership, and the ability to ensure projects meet deadlines, quality standards, and safety regulations. The Lead Fabricator will also participate in the installation of fabricated products and systems at customer job sites.

Job Duties

•Operate metalworking machines such as shears, brakes, punches, drill presses, and CNC equipment to cut, bend, punch, drill, shape, or straighten sheet metal.

•Fit and join sheet metal parts using riveting, welding, soldering, and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, partition frames, dust collection piping, and material handling systems.

•Perform installation of fabricated products and systems at customer job sites.

•Read and interpret engineering drawings, blueprints, sketches, and work specifications to ensure proper fabrication and installation.

•Measure, fit, assemble, and secure fabricated components during installation.

•Use hand tools, power tools, welding equipment, and other equipment necessary for fabrication and installation.

•Ensure installed products are properly aligned, secured, and meet project specifications.

•Inspect product quality and 100% conformance to specifications.

•Lead and supervise a team of fabricators and welders in daily operations.

•Assign tasks, monitor progress, and ensure accuracy and quality in all work.

•Inspect finished products and completed installations to verify measurements, tolerances, and compliance.

•Train and mentor team members on fabrication techniques, equipment, installation procedures, and safety practices.

•Follow all company safety policies and job-site safety requirements.

•Travel to customer job sites as needed to complete installation work.

Skills and Qualifications:

•Must have custom weld fabrication experience with sheet metal and structural welding.

•MIG welding various mild steel including 16 gauge, ¼", 3/8", and ½".

•TIG/Stick welding experience a plus.

•Previous installation experience is preferred.

•Ability to read and comprehend engineering drawings, sketches, blueprints, and work specifications.

•Mechanically inclined with the ability to troubleshoot.

•Strong math and measurement skills.

•Must have own tools and welding equipment.

•Ability to work both independently and as part of a team.

•Strong leadership and communication skills.

•Ability to stand for 8+ hours a day.

•Ability to work in a fabrication shop and at customer job sites.

Benefits Once Hired In!

•Benefits become effective the first of the month following date of hire:

•Health Insurance – Medical – Priority Health

•Dental Insurance

•Vision Insurance

•Life Insurance

•Short-Term and Long-Term Disability

•401(k)

•Vacation

This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.

Cross training on all machines such as Sheet Stock, Mold Press, Pultrusion, Glass cutting, and/or Mixing.

Job Duties:

•Loads the glass into the press, lines it up properly

•Spreads the resin on the glass

•Sanding the edges once it is complete.

•Inspecting the parts.

•Packaging them into the correct packaging.

•Working in the mixing/SMC department

Skills and Requirements:

•Manufacturing experience preferred but not required

•Machine Operating is a plus

•Ability to stand for 8+ hours a day

•Comfortable working with Fiberglass

Benefits once hired in!

•401(k)

•Dental insurance

•Employee assistance program

•Flexible schedule

•Flexible spending account

•Health insurance

•Life insurance

•Paid time off

•Referral program

•Vision insurance

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Moves castings in different phases of the process to their designated location. Will also be responsible to provide racks, baskets, containers as needed.

Job Duties:

• Operates a forklift in congested areas around people and equipment.

• Move material throughout facility to their designated location.

• Provide containers, baskets, racks as needed to keep production moving.

• Utilize Plex System to move product within processes.

• Supports FPI process flow/covers breaks when assigned.

• Organizes empty containers and dunnage inside and outside the plant.

Skills and Qualifications:

• Experience with operating a forklift.

• Comfortable in a high heat environment.

• Must be able to read and understand work instructions.

• Must be able to write and complete required paperwork and enter information into Plex system.

• Must have basic math skills - add, subtract, multiply, and divide.

• The ability to stand for 8+ hours a day

• Ability to lift up to 30 lbs

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Moves castings in different phases of the process to their designated location. Will also be responsible to provide racks, baskets, containers as needed.

Job Duties:

• Operates a forklift in congested areas around people and equipment.

• Move material throughout facility to their designated location.

• Provide containers, baskets, racks as needed to keep production moving.

• Utilize Plex System to move product within processes.

• Supports FPI process flow/covers breaks when assigned.

• Organizes empty containers and dunnage inside and outside the plant.

Skills and Qualifications:

• Experience with operating a forklift.

• Comfortable in a high heat environment.

• Must be able to read and understand work instructions.

• Must be able to write and complete required paperwork and enter information into Plex system.

• Must have basic math skills - add, subtract, multiply, and divide.

• The ability to stand for 8+ hours a day

• Ability to lift up to 30 lbs

Benefits once hired in!

• Medical, Dental, and Vision Insurance

• PTO

• 401K

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Over the road truck driving! Join a reliable, team-oriented company offering excellent benefits, late-model equipment, and steady year-round work.

Job Duties:

•OTR routes with some local driving; Routes cover Colorado and everything east, including Canada. No West Coast travel.

•Hauling Falk Panels.

•No-touch freight.

•1–4 stops per day.

Drivers must be comfortable using: Geotab, WhatsApp, and Microsoft Teams.

Equipment:

•Late-model Kenworth W-990 trucks (5 years old or newer).

•Manual transmission.

•DOT #3435625.

Skills and Qualifications:

•Valid CDL-A License.

•Flatbed experience preferred but not required.

•Minimum 2 years of verifiable OTR experience.

•No major moving violations.

•3 points or less on driving record.

•No criminal background or DUI convictions (Canada travel required)

Benefits once hired in!

•Health insurance for driver and family fully covered

•Dental and vision available (employee paid)

•PTO: 2 weeks vacation (up to 5 years)

•Paid Christmas week (work is voluntary)

•All federal holidays recognized

•Annual Christmas and Summer parties

•Fun, reliable team atmosphere

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Packagers are responsible for cleaning packaging materials, loading items into containers, and weighing and labeling the items appropriately.

Job Duties:

• Make corrugated boxes

• Labeling bags, boxes, placing boxes on pallets

• Perform final checks for defective items

• Ensure all working items make it to the loading area or inventory

• Keep detailed records of materials and shipments

• General cleaning of plant floor when needed.

• Production Laborer

Skills and Qualifications:

•General manufacturing preferred but not required

• High school diploma/GED (Preferred but not required)

• The ability to stand for 8+ hours a day

• The ability to work in a high heat environment

Benefits once hired in:

• Health, dental, vision, and life insurance.

• Earn up to 40 hours of paid time off their first year.

• 40 hours of sick and 40 hours of vacation in their second year.

• Employees will have access to the coffee shop during their shift. Regular coffee, water, and lemonade are available at no cost and drinks such as frapes are available for $1.00.

• Offer a more flexible schedule than most allowing unpaid time off as long as it’s approved by a supervisor.

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

We are seeking a reliable and detail-oriented Assembly Technician to join our production team. The ideal candidate will perform a variety of tasks on the manufacturing floor, including operating machinery, assembling components, inspecting finished goods, and helping to package products.

Job Duties:

•Operate and monitor manufacturing equipment such as thermal forming machines, glueing machines, and other production tools.

•Perform foam cutting using machines, hand or power tools as needed.

•Conduct visual and dimensional inspections to ensure product quality and conformity to specifications.

•Assemble components accurately according to work instructions and process standards.

•Package finished products with care to prevent damage during storage and shipment.

•Using a hammer to punch out the holes in the products.

•Operate a forklift as needed.

Skills and Qualifications

•At least 1 year of experience in a manufacturing setting.

•High school diploma or GED

•Ability to lift up to 50lbs

•The ability to stand for 8+ hours a day

Benefits once hired:

•Medical Insurance

•Dental Insurance

•Vision Insurance

•PTO

•401K

•Bi-Weekly Pay

•Safety Shoes Credit

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Produce a product according to a set of directions given by a Manufacturing Record while following cGMP’s and current SOP’s.

Job Duties:

• Process material per cGMP’s.

• Ensure awareness of standard operating procedures (SOP’s) and regulations pertaining to the task at hand.

• Ensure all documentation is filled out according to cGMP’s and SOP’s.

• Process all material in a hygienic way.

• Lifting containers/bags of products into grinders, blenders, ovens, etc.

• Micronizing, blending, repackaging, sifting and metal detection and removal

Skills and Qualifications:

• Production background in Pharmaceuticals and or Food, preferred but not required

• Ability to lift 50 pounds, anything over will require a team lift.

• Ability to stand during a 8+hour shift

• Knowledge of cGMP requirements a plus.

Benefits once hired in!

• Health, Dental, & Vision Insurance

• PTO

• 401K

• Paid Holidays

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history. *

We are seeking a reliable and detail-oriented Assembly Technician to join our production team. The ideal candidate will perform a variety of tasks on the manufacturing floor, including operating machinery, assembling components, inspecting finished goods, and helping to package products.

Job Duties:

•Operate and monitor manufacturing equipment such as thermal forming machines, glueing machines, and other production tools.

•Perform foam cutting using machines, hand or power tools as needed.

•Conduct visual and dimensional inspections to ensure product quality and conformity to specifications.

•Assemble components accurately according to work instructions and process standards.

•Package finished products with care to prevent damage during storage and shipment.

•Using a hammer to punch out the holes in the products.

•Operate a forklift as needed.

Skills and Qualifications

•At least 1 year of experience in a manufacturing setting.

•High school diploma or GED

•Ability to lift up to 50lbs

•The ability to stand for 8+ hours a day

Benefits once hired:

•Medical Insurance

•Dental Insurance

•Vision Insurance

•PTO

•401K

•Bi-Weekly Pay

•Safety Shoes Credit

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Salesperson needed for growing metal fabrication and dust collection company.

Job Duties:

•Apply product knowledge to marketing;/Sales of goods and services

•Apply sales techniques to best serve our customers

•Identify best products for customers needs.

•Practice “Honesty and Integrity” in all matters

•Develop sales plan to grow sales/ cold calling, prospecting, and networking.

•Develop solid customer relationships.

•Sell products and services.

•Develop, present, and price customer solutions.

•Oversee installations in conjunction with field crews.

•Follow-up with customers to ensure relationship continues.

•Expand customer base by attracting new customers.

Skills and Qualifications:

•Five years sales experience in the sheet metal and/or material collection industry.

•A wide knowledge base covering sheet metal applications is a plus.

•Ability to accurately measure and draw sketches, and read blue prints.

•Mechanically inclined.

•Knowledge of calculating CFM’s and static pressure.

•Computer skills (Outlook, Word & Excel)

•Project management skills

•Knowledge of AutoCAD a plus

•Strong math skills.

•Must have own tools and welding equipment.

•The ability to stand for 8+ hours a day

Benefits once hired in!

•Benefits become effective the first of the month following date of hire:

•Health Insurance - Medical - Priority Health

•Dental Insurance

•Vision Insurance

•Life Insurance

•Short Term and Long Term Disability

•401(k)

•Vacation

Ensure all production areas are clean and sanitized according to safe food handling standards. Could include wiping down production rooms for product change overs. Clean common areas such as bathrooms, break rooms, and offices.

Job Duties:

• Clean and sanitize production areas as necessary.

• Clean common areas such as break rooms, bathrooms, and offices if need be.

• Follow proper sanitization practices in accordance with safe food handling.

• Any other assigned duties.

Skills and Qualifications:

• Janitorial background preferred, but not required.

• Ability to lift 50 pounds, anything over will require a team lift.

• Ability to stand during a 8+hour shift

• Knowledge of cGMP requirements a plus.

Benefits once hired in!

• Health, Dental, & Vision Insurance

• PTO

• 401K

• Paid Holidays

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history. *

We are seeking a Shipping and Receiving Clerk to become an integral part of our clients team. Shipping and Receiving Clerks perform tasks that are essential to our production processes.

Job Duties:

• Receive incoming shipments and verify materials against packing slips and purchase orders.

• Inspect incoming materials for damage, shortages, or discrepancies and report issues as needed.

• Prepare outgoing orders and shipments according to customer and company requirements.

• Package, label, and stage products for shipment.

• Load and unload trucks safely and efficiently with a forklift.

• Organize materials, products, and shipments in designated areas.

• Verify part numbers, quantities, and shipping information for accuracy.

• Complete shipping and receiving paperwork and maintain accurate records.

• Coordinate with production and warehouse teams to ensure materials and finished products are available when needed.

• Keep shipping and receiving areas clean, organized, anCompled safe.

•Operate a pallet-wrapping machine to securely wrap and stabilize finished pallets for storage and shipment. Ensure products are properly positioned and wrapped according to company standards.

Skills and Qualifications:

•S&R experience.

•Forklift experience

•Be able to lift up-to 35 lbs on a regular basis. Occasionally lift up-to 40 lbs.

•Be able to sit or stand for long periods of time

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

We are seeking a highly organized, motivated, hands-on individual to support our dispatch, transportation, warehouse, shipping, and receiving operations. This position is approximately 50% dispatch/administrative coordination and 50% warehouse/dock coordination.

Job Duties:

Dispatch & Logistics Responsibilities – Approximately 50%

• Assist the dispatcher with daily schedules, driver run sheets, customer paperwork, phone calls, and general dispatch support.

• Communicate with approximately 12 CDL truck drivers throughout the day regarding pickups, deliveries, trailer numbers, delays, schedule changes, and customer requirements.

• Prepare driver paperwork before runs and keep the dispatch board accurate and updated throughout the day.

• Track drivers and equipment using GPS and communicate changes or delays as needed.

• Collect, organize, check, and account for all completed driver paperwork.

• Verify that each driver turned in the required paperwork for every completed run and immediately follow up on missing information.

• Help keep drivers on task and make sure problems and delays are communicated rather than ignored.

• Support the main dispatcher so they can focus on customer emails, scheduling, planning, and future loads.

Warehouse / Shipping & Receiving Responsibilities – Approximately 50%

• Regularly walk the warehouse and dock areas to stay aware of current shipping and receiving activity.

• Communicate priorities to forklift drivers and identify which trailers need to be loaded or unloaded next.

• Collect load and unload paperwork from forklift drivers and verify trailer numbers and customer information.

• Make sure completed loads and unloads are communicated back to Dispatch.

• Help coordinate dock doors, trailer movement, incoming loads, outgoing loads, and warehouse priorities.

• Identify trailers or loads that have been sitting too long and determine what is causing the delay.

• Keep Dispatch, drivers, forklift operators, and warehouse employees working from the same information.

• Identify missing paperwork or communication problems immediately and help resolve them.

Truck, Trailer & Maintenance Coordination

• Report truck and trailer repair needs and contact repair vendors as needed.

• Help schedule repairs and follow up until equipment is returned to service.

• Assist with tracking preventive maintenance for trucks and trailers.

• Communicate equipment problems before they interfere with the next day's schedule.

• Help make sure the correct trucks and trailers are available for upcoming runs.

End-of-Day / Next-Day Preparation

• Contact drivers before the end of the day with their next-day assignment, start time, truck/trailer information, and special instructions.

• Prepare the next day's driver paperwork in advance.

• Make sure early-start drivers can arrive and leave without waiting for office personnel.

• Our goal is for a driver scheduled to leave at 6:00 AM to already know the assignment, have the required paperwork, and begin the route independently.

Skills and Qualifications:

• Highly organized, dependable, and detail-oriented.

• Strong communication and follow-through skills.

• Comfortable working with CDL drivers, forklift operators, warehouse employees, customers, and vendors.

• Willing to work both at a desk and actively on the warehouse floor and docks.

• Able to handle multiple priorities and make reasonable decisions without constant direction.

• Comfortable making phone calls, using email, GPS systems, and basic office programs.

• Able to professionally hold people accountable and follow up until tasks are completed

*This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history. *